We can't change the fact that connections in a hydraulic system will get damaged. It allows us to make changes there. If it needs to replace a component or adjust a fitting like metric adapters, we could do that for the betterment of the hydraulic system. From small tools to fittings designs, everything has improved for smoothening the installation. Also, it offers years of reliability on the hydraulic system.
Tools, parts, fittings for Hydraulic systems:
-
Metal fittings: Generally the threads on a pipe fitting are tapered. It depends on the pressure when the male half of the fitting gets adjusted with the female half. There are always chances of leakage near the thread because it is sensitive to torque. Metric adapters can be a good way to stop that.
-
'O' type fittings: 'O' ring typed fittings are creating a buzz in the current market because of their leak-free connections. There are three kinds of fittings available on the current market, flat face O-ring fittings, SAE straight thread fittings, and O-ring flange fittings.
-
Hydraulic flanges: You are going to need hydraulic flanges in such cases where the tubing is larger than 1inch. You have to apply larger hex nuts to tighten the OD and also it needs larger wrenches. Applying torque is also important to smoothly run the operation.
The important thing is that even after so many advancements, the basic purpose of the fitting remains the same.
To know about this, consider visiting this site - https://boschhydraulic.com/
